Rhino 5.0 Work-in-Progress Release 2009-09-22 - What's New |
|||
|
|||
WARNING: NOT FOR COMMERCIAL USE
USE AT YOUR OWN RISK.
WIP releases may crash, lock up, or corrupt files. Read about the Rhino Development Process before you download
Installing Rhino 5.0 WIP will not affect Rhino 4.0 - you can have both on your computer at the same time.
What's New, WIP 2009-09-22 (22-Sep-2009)
(Printer Friendly)
Bug Fixes:
- BoxEdit: Cancel button renamed to Reset.
- BoxEdit: A scrollbar has been added to the dialog box.
What's New, WIP 2009-09-17 (17-Sep-2009)
(Printer Friendly)
Bug Fixes:
- ApplyBoxMapping: Now uses the objects' bounding box.
- ConnectSrf: A failure bug has been fixed.
- ExtendTrimmedSrf: In some cases, the side edges of a surface were incorrectly moved. This has been fixed.
- Intersect: Several failure bugs have been fixed, especially cylinder and sphere cases.
- ReduceMesh incorrectly created non-manifold polygons. This is fixed.
- ReduceMesh incorrectly deleted texture information. This is fixed.
What's New, WIP 2009-09-09 (9-Sep-2009)
(Printer Friendly)
New Features:
- DevSrf: New command - Displays the developable ruling lines between pairs of rails. The ruling display updates as you edit the rails so you can see when you have a shape that is a developable surface.
Enhanced Features:
-
Circle:
- A new Orientation option allows setting the circle plane perpendicular to any picked direction.
- Circle: New Circumference option. Pick a center and enter a value for the circumference.
Bug Fixes:
- FilletEdge: Several failure bugs fixed.
- ShortPath: A failure bug has been fixed.
- Split/Trim: Using block instances as cutters failed or crashed Rhino. This is fixed.
What's New, WIP 2009-09-02 (2-Sep-2009)
(Printer Friendly)
New Features:
- MeshRepair: New command - Opens a Mesh Repair Wizard. See: http://en.wiki.mcneel.com/default.aspx/McNeel/MeshRepair.html
Enhanced Features:
- BoxEdit: A new Copy objects option has been added.
- Cone: A new Cap option determines whether the cone is created as a solid with the bottom surface attached or an open surface.
- Cylinder: A new Cap option determines whether the cylinder is created as a solid with the top and bottom surface attached or an open surface.
- DimAngle: Degrees-minutes-seconds added to angle format.
- MeshTCone / MeshCylinder: A new Cap option has been added for making open mesh objects.
- Paraboloid: The Cap option has been renamed to Solid.
- SetOneDaySunAnimation: An option to not run the HTML viewer has been added.
- SetOneDaySunAnimation: A dialog box for settings has been added.
- SetSeasonalSunAnimation: A dialog box for settings has been added.
- TCone: A new Cap option determines whether the truncated cone is created as a solid with the top and bottom surface attached or an open surface.
- Tube: A new Cap option determines whether the cylinders are created as a solid with the top and bottom surface attached or open surfaces.
Bug Fixes:
- FilletEdge: A failure bug has been fixed.
- MaterialEditor: Material settings were not properly saved. This is fixed.
- Open:STEP: Files created with ProE had parts moved from their original position. This is fixed.
- Pipe crash fixed.
- SelBoundary: A failure bug has been fixed.
WARNING: NOT FOR COMMERCIAL USE
USE AT YOUR OWN RISK.
WIP releases may crash, lock up, or corrupt files. Read about the Rhino Development Process before you download
WIP releases may crash, lock up, or corrupt files. Read about the Rhino Development Process before you download
Installing Rhino 5.0 WIP will not affect Rhino 4.0 - you can have both on your computer at the same time.
What's New, WIP 2009-09-22 (22-Sep-2009)
(Printer Friendly)
Bug Fixes:
- BoxEdit: Cancel button renamed to Reset.
- BoxEdit: A scrollbar has been added to the dialog box.
What's New, WIP 2009-09-17 (17-Sep-2009)
(Printer Friendly)
Bug Fixes:
- ApplyBoxMapping: Now uses the objects' bounding box.
- ConnectSrf: A failure bug has been fixed.
- ExtendTrimmedSrf: In some cases, the side edges of a surface were incorrectly moved. This has been fixed.
- Intersect: Several failure bugs have been fixed, especially cylinder and sphere cases.
- ReduceMesh incorrectly created non-manifold polygons. This is fixed.
- ReduceMesh incorrectly deleted texture information. This is fixed.
What's New, WIP 2009-09-09 (9-Sep-2009)
(Printer Friendly)
New Features:
- DevSrf: New command - Displays the developable ruling lines between pairs of rails. The ruling display updates as you edit the rails so you can see when you have a shape that is a developable surface.
-
Circle:
- A new Orientation option allows setting the circle plane perpendicular to any picked direction.
- Circle: New Circumference option. Pick a center and enter a value for the circumference.
- FilletEdge: Several failure bugs fixed.
- ShortPath: A failure bug has been fixed.
- Split/Trim: Using block instances as cutters failed or crashed Rhino. This is fixed.
What's New, WIP 2009-09-02 (2-Sep-2009)
(Printer Friendly)
New Features:
- MeshRepair: New command - Opens a Mesh Repair Wizard. See: http://en.wiki.mcneel.com/default.aspx/McNeel/MeshRepair.html
- BoxEdit: A new Copy objects option has been added.
- Cone: A new Cap option determines whether the cone is created as a solid with the bottom surface attached or an open surface.
- Cylinder: A new Cap option determines whether the cylinder is created as a solid with the top and bottom surface attached or an open surface.
- DimAngle: Degrees-minutes-seconds added to angle format.
- MeshTCone / MeshCylinder: A new Cap option has been added for making open mesh objects.
- Paraboloid: The Cap option has been renamed to Solid.
- SetOneDaySunAnimation: An option to not run the HTML viewer has been added.
- SetOneDaySunAnimation: A dialog box for settings has been added.
- SetSeasonalSunAnimation: A dialog box for settings has been added.
- TCone: A new Cap option determines whether the truncated cone is created as a solid with the top and bottom surface attached or an open surface.
- Tube: A new Cap option determines whether the cylinders are created as a solid with the top and bottom surface attached or open surfaces.
- FilletEdge: A failure bug has been fixed.
- MaterialEditor: Material settings were not properly saved. This is fixed.
- Open:STEP: Files created with ProE had parts moved from their original position. This is fixed.
- Pipe crash fixed.
- SelBoundary: A failure bug has been fixed.
© 2009
McNeel •
North America •
Europe •
Latin America • Asia