What's New, WIP 2010-02-02 (2-Feb-2010)
(프린터 버전)
버그 수정:

• DimOrdinate: Did not automatically detect whether to make an X or Y datum dimension as it did in V4. This is fixed.
• MaterialEditor: A crash in the Blend material has been fixed.
• ReduceMesh 크래시가 수정되었습니다.
• Reparamaterize: When surfaces are included in a block object, they are duplicated for reparameterization.
• Text: A new Mask option has been added that displays a rectangle that hides the geometry underneath in the display and for printing. The mask color and border can be configured with TextProperties.
  

• Open:STEP: Now supports nonstandard schema names and abbreviated entity types created by Unigraphics.

• Autocomplete: The space between the exact and fuzzy matches incorrectly acted as Enter. This is fixed.
• OrientOnSrf crash fixed.
• RunScript crash fixed.

• Rhino Render:
  
  • The Content Browser is now gone, and you can replicate its functionality exactly with the new stuff.
  • There are default groupings set up for the tabs now.
  • The menu is now reconfigured.

• ExtractMeshEdges: A new Join results option has been added.
• Slab: New BothSides option added.

• Dim crash fixed.
• ExtrudeCrv crash fixed.
• FilletEdge: 몇 가지 오류가 수정되었습니다.
• Import 크래시가 수정되었습니다.
• Open:DWG/DXF 크래시가 수정되었습니다.
• PatchSingleFace: The command incorrectly quit if a non-naked edge was selected. This is fixed.
• RemoveKnot: The display did not correctly update as knots were removed. This is fixed.
• Save:OBJ: Now supports long lines.

• Block: Blocks containing objects on layers that were turned off could incorrectly still be selected. This is fixed. Now, if you can't see the block (the layer the entities are on is off), when window selecting, SelAll, or SelBlockInstance does not select the block even though insert layer is still on, the instance is not selected.
  
• EditScript: Ctrl+Y now works as Redo.
• Merge2Faces crash fixed.
• Zoom, Target: The OnSrf object snap did not work with this command.

• BoxEdit: Can now accept units other than active unit system.
• Dimension Properties: A new button takes the user to the Style configuration page in the Options dialog box.
• Open: It is now possible to cancel opening files that are locked by another user.
• Purge: Optons now persist between Rhino sessions.
• Save:DWG/DXF: Schemes can now be imported and exported through the Edit Schemes dialog and the AcadSchemes command.

• BoxEdit: If you are in "Transform objects individually" mode, and if all objects have the same x, y, and/or z dimension, the corresponding edit fields did not show a delta. The same applies to the position fields. If objects share a pivot coordinate, then the position fields not longer display a delta. This is fixed.
   
  
• Contour: Some failure bugs have been fixed by new intersectors.
• CrvSeam: A failure bug has been fixed.
• DimRadius: Improvements in leader placement and editing.
• DimRadius: Now when moving a dimension point, the arrow leader attempts to stay level.
• DimRadius: The behavior of the arrow location has been improved.
• Extrude: The entire polysurface highlights rather than a face, and the extrusion is trimmed to the surfaces it first hits along its extrusion path.
  
• ExtrudeCrv: Additional checking for invalid extrusions has been added.
• Object Snap: The object drag osnap is now delayed by default. When you select an object to drag it, you now have 250ms to do an old style non-osnapped drag. If the osnap was able to snap to something, the cursor tail will disappear, and after the delay the osnap will be activated, and you can do a precise drag from the osnapped point.
• Open/Save: The open and save file location incorreclty returned to the default location if Rhino 5 is closed without opening a file or using the SetWorkingDirectory command. This is fixed.
• Open:DWG/DXF: In some cases, an unflagged bad object was created on import. This is fixed.
• Open:PDF: A problem with the unit settings has been fixed.
• Open:STP: A problem with importing onto layers that are off is fixed.
• Paste: A problem with pasting from the Edit menu selection has been fixed.
• Print: Minor changes to the dialog box layout have improved readability.
• RemoveMultiKnotSrf: Some problems with updating the display have been fixed.
• Save:DWG/DXF: 
  
  • When exporting or saving to DWG/DXF, the "Primary text length factor" is incorrectly not being set in the "Default" imported style from Rhino. The AutoCAD control variable DIMLFAC is now set to match the corresponding length factor.
  • Special characters in layer names were lost. This is fixed.
  • Layer names with mixed upper and lower case were incorrectly converted to upper case. This is fixed.
• SelLast: A problem with selecting inappropriate objects has been fixed.
• VariableFilletEdge: Several failure bugs have been fixed.

• Blocks/Layers: Blocked objects on separate layers did not respond properly to layers being turned off. This is fixed.
• CrvSeam: Cancelling the CrvSeam command incorrectly resorted the layers in the Layer dialog box. This is fixed.
• FilletEdge: A problem with creating bad objects has been fixed.

• Untrim: Broken into 4 commands:
  
  • Untrim - Pick an edge to untrim a single edge or hole.
  • UntrimHoles - Pick a surface to untrim all holes.
  • UntrimBorder - Pick a surface to untrim outer boundary.
  • UntrimAll - Pick a surface to untrim all edges, holes, and outer boundary.

• Radius: New MarkRadius option keeps the radius circle like the Curvature command.
• RecordAnimation: Scripting support for target folder has been added.
• ReplaceBlock: 모드와 뷰를 표시하는 오른쪽 클릭 메뉴가 추가되었습니다.

• BoxEdit: Objects did not properly respond to the construction plane vs. world settings. This is fixed.
• ConnectSrf: Now the only the edges to be extended need to be selected.
• Convert: A problem with keeping endpoint locations intact has been fixed.
• Crashes fixed:
  
  • MeshFace
  • MoveFace
  • Import:SKP
  • Move
  • Import:FBX
  • Dim
  • DimDiameter
  • IronPython
  • Import
  • Sweep1
  • FilletEdge
• DrawOrder: Using DrawOrder commands incorrectly removed the image from a surface created with PictureFrame. This is fixed.
• FilletEdge/FilletSrf: A failure bug with cylindrical holes has been fixed.
• Pull: When circles are pulled to a planar surface, the result will now be a circle or ellipse.
• Untrim: A failure bug has been fixed.

• FilletEdge, BlendEdge, ChamferEdge, VariableFilletSrf, VariableBlendSrf, VariableChamferSrf: The method used to calculate the DistFromEdge option has been improved.
• Gumball: A rare crash while dragging objects with AutoGumball was fixed.

• Draw Order: New commands - BringToFront, BringForward, SendToBack, SendBackward, ClearDrawOrder allow control over display objects.

• Dim: The new Object option allows selecting a curve or edge to dimension.

• Make2D 크래시가 수정되었습니다.
• Open:AI: A problem with spikey curves has been fixed.
• Open:DWG/DXF: Some hatch objects were skipped. This is fixed.

• SectionTools is now part of Rhino 5.0 WIP.

• Dimensions: History added to linear and angular dimensions.

• VariableFilletSrf crash fixed.

• DimRotated: Now remembers the last angle used as the default for the next dimension.
• Explode: A warning dialog now appears when exploding very large meshes.

• Dim: The current dimension style name is now part of the command options for all of the dimension commands.
• ExtendCrvOnSrf: A problem where a curve is extended beyond the edges has been fixed.
• Leader: Text moved when a leader was exploded. This is fixed.
• MaterialEditor: Several problems with the preview display have been fixed.
• Radius: Reverted to V4 behavior allowing pre-picked curves. New options provide more selection options.
• Save:STEP: A problem with closed files creating open meshes has been fixed.
• Save:VRML: Texture color was incorrectly replaced by material color when the mesh objects are exported and imported with VRML format.  This is fixed.
  
• Save: Reading and writing files larger than 4 GB is now supported.  This required a change in the file format. The latest Rhino 5.0 WIP will read any files. Using the SaveAs command, you can save files for V2, V3 or V4. 
   
  If you save a V5 file that supports larger files and try to read it in an older Rhino V5 WIP, the older Rhino V5 WIP will tell you the file was written by a newer version of Rhino.  The fix is to download the newest V5 WIP.
  

• RecordAnimation: A new option remembers a previously used target folder or allows it to be changed.
• ReduceMesh 크래시가 수정되었습니다.

• Dim: New arrowheads with longer 4:1 and 6:1 aspect ratios are now available.

• Dim: Moving the dimension text out of line with the arrows, the arrows incorrectly flipped to the outside of the extension lines. This is fixed.
• Leader: Changing layers in the middle of the command incorrectly did not apply the new layer. This is fixed.
• Line: When using the BothSides and Normal options to draw a line on a surface, typing a number for the length incorrectly did not draw on both sides. This is fixed.
• Loft: 로프트를 업데이트할 때 히스토리에서 점 개체가 무시되었습니다. 이것이 수정되었습니다.
• MoveEdge: 실패 오류가 수정되었습니다.
• MoveFace: A failure bug has been fixed.
• ReduceMesh 크래시가 수정되었습니다.
• Render: Surfaces in the Layout incorrectly showed up in a Render of the model space. This is fixed.
  
• Sweep2 crash fixed.
• Trim 크래시 오류가 수정되었습니다.

• Dim: New Property overrides allow supression of extension lines.
• DimAngle: A new ability to select arcs or polyline arc segments has been added. Rhino automatically draws extension lines from the arc ends towards a center tic and place the angle dimension between the extension lines.
• History: 히스토리가 잠겨진 개체의 속성을 편집할 수 있게 되었습니다. 레이어, 색상을 변경하거나 지오메트리에 영향을 주지 않는 해석 명령을 사용할 수 있어 히스토리가 손상되지 않습니다.
• SketchUp Export 에서 이제, 평면형 메쉬 영역의 안쪽/바깥쪽 경계를 만들려고 시도합니다. 이로 인해 결과물인 개체를 SketchUp 사용자가 사용하기 쉽게 되었습니다. 단일 삼각형 대신, 전체 벽에 Push/Pull 을 사용할 수 있습니다.

• Crv2View 크래시가 수정되었습니다.
• DimOptions: The way that fractions and feet and inches were displayed in the dimension dialog box and on the sheet were different. This is fixed.
• Intersect: 실패 오류가 수정되었습니다.
• Layout: ViewportPrint 의 color 옵션이 올바르게 실행되지 않았습니다. 이것이 수정되었습니다.
• Loft: 기본값을 사용할 때 Enter 를 누르면 실행됩니다.
• MatchSrf 크래시가 수정되었습니다.
• MaterialEditor: VRay가 렌더러로 선택된 경우, 재질을 올바르게 찾아볼 수 없었습니다. 이것이 수정되었습니다.
• RhinoRender: 투명 배경에서 개체 주위의 일부 픽셀이 올바르게 표시되지 않았습니다. 이것이 수정되었습니다.
• 서페이스/서페이스 교차: 가능한 경우, 서페이스 아이소커브를 반환합니다.
• 서페이스/서페이스 교차: 많은 실패 오류가 수정되었으며, 특히 접점에서 서페이스 교차하는 경우가 향상되었습니다.

• Texture mapping: In a texture’s local mapping section, there is now a Display checkbox that causes the selected texture to appear on all related materials in the viewport as the “Color” texture making it visible, no matter what the texture represents.

• Alt 키를 눌러도 메뉴로 이동하지 않았습니다. 이것이 수정되었습니다.
• CurveBoolean: 호를 입력값으로 사용했을 때 올바르게 호가 출력되지 않았습니다. 이것이 수정되었습니다.
• DimAngle: 잘못된 개체의 그립을 슬라이드하면 각도 치수가 변경되었습니다 . 이것이 수정되었습니다.
• Display: 제어점이 해당 서페이스에서 멀리 떨어져 있을 때, Rhino의 내부 클리핑 면이 뷰를 올바르게 클립 실행하지 못했습니다. 이것이 수정되었습니다.
• Layout: 인쇄 뷰와 배율이 올바르게 실행되지 않았습니다. 이것이 수정되었습니다.
• Make2D 크래시가 수정되었습니다.
• MaterialEditor: Material Editor 대화상자가 올바르게 표시되지 않았습니다. 이것이 수정되었습니다.

• CPlane: Object 옵션에서, Object 옵션을 선택하기 전/후에 한 점을 선택하여 개체를 선택했을 때, 제어점을 선택할 수 있게 되었습니다.
• Dot: 화면 크기와 글꼴이 이제 도트의 속성이 되어, Properties 대화상자에서 편집이 가능해졌습니다.

• Circle: FitPoints - 점에 맞추는 기능이 향상되었습니다.
• CrvSeam: 프롬프트가 변경되었습니다.
• ExtractRenderMesh/ExtractAnalysisMesh: 전체 그룹이 아니라 한 그룹에서 개별적인 개체가 잘못 선택되었습니다. 이것이 수정되었습니다.
• Import: Files of Type 목록에서 목록 하단의 All 카테고리가 두 번 표시되었습니다. 두 번째에서 형식이 연속해서 여러 번 반복되었습니다. 이것이 수정되었습니다.
  
• Make2D 크래시가 수정되었습니다.
• Offset: 모서리에서의 실행이 향상되었습니다.
• Open:SKP 크래시가 수정되었습니다.
• ReduceMesh 크래시가 수정되었습니다.
• Save: 백업 파일을 만드는 옵션이 추가되었습니다. 이 옵션은 기본적으로 사용함으로 설정되어 있습니다.
• SetPt: 음영 뷰에서의 명령 실패 오류가 수정되었습니다.
• UnrollSrf: 명령 실패 오류가 수정되었습니다.

• MaterialEditor: The Material Editor is undergoing a lot of rework at the moment. Comment on recent changes to help establish the way this will work.

• ExtractRenderMesh/ExtractAnalysisMesh: If the original objects were grouped, the result was incorrectly included in the group. This is fixed.
• MaterialEditor: Mouse wheel scrolling did not work properly in the Material Editor. This is fixed.
• Options > 선택 메뉴: "Show object type details" 항목이 선택되어 있는 경우, 별다른 디테일이 없을 때 선택 메뉴 대화상자에 개체 유형이 표시됩니다.

• Select:

  • 선종류가 Dotted로 설정된 커브를 한 번의 클릭으로 선택하기 어려웠습니다. 이것이 수정되었습니다.
  • 겹쳐 있는 서페이스를 선택할 때의 기능이 향상되었습니다.

• MakeUniformUV: 새 명령 - 균일화를 실행할 서페이스의 방향을 선택할 수 있습니다.

• ReduceMesh: 완전히 새로운 ReduceMesh 명령이 구현되었습니다. 성능이 향상되었습니다.

• Intersect: 몇 가지 명령 실패 오류가 수정되었습니다.
• ReduceMesh incorrectly left holes if the mesh was not welded first. This is fixed.
• SetActiveViewport: 뷰포트 이름을 영어 이외의 언어로 지정할 수 없었습니다. 이것이 수정되었습니다. 다음의 명령들도 이에 해당합니다: BringViewportToTop, PushViewportToBack, SetActiveViewport, SetMaximizedViewport.
• 서페이스/서페이스 교차: 몇 가지 오류가 수정되었으며, 관련 기능이 계속 향상되고 있습니다.

• BoxEdit: Cancel button renamed to Reset.
• BoxEdit: A scrollbar has been added to the dialog box.

• ApplyBoxMapping: Now uses the objects' bounding box.
• ConnectSrf: 명령 실패 오류가 수정되었습니다.
• ExtendTrimmedSrf: In some cases, the side edges of a surface were incorrectly moved. This has been fixed.
• Intersect: 몇 가지 명령 실패 오류가 수정되었으며, 특히 원통과 구에서의 실행이 향상되었습니다.
• ReduceMesh incorrectly deleted texture information. This is fixed.
• ReduceMesh incorrectly created non-manifold polygons. This is fixed.

• DevSrf: New command - Displays the developable ruling lines between pairs of rails. The ruling display updates as you edit the rails so you can see when you have a shape that is a developable surface.

• Circle:

  • A new Orientation option allows setting the circle plane perpendicular to any picked direction.
  • Circle: New Circumference option. Pick a center and enter a value for the circumference.

• FilletEdge: Several failure bugs fixed.
• ShortPath: 명령 실패 오류가 수정되었습니다.
• Split/Trim: 블록 인스턴스를 커터로 사용할 때 Rhino에서 크래시가 발생하거나 명령이 올바르게 실행되지 않았습니다. 이것이 수정되었습니다.

• MeshRepair: 새 명령 - Mesh Repair Wizard 를 엽니다. 참조: http://en.wiki.mcneel.com/default.aspx/McNeel/MeshRepair.html

• BoxEdit: 새로운 Copy objects 옵션이 추가되었습니다.
• Cone: A new Cap option determines whether the cone is created as a solid with the bottom surface attached or an open surface.
• Cylinder: A new Cap option determines whether the cylinder is created as a solid with the top and bottom surface attached or an open surface.
• DimAngle: Degrees-minutes-seconds added to angle format.
• MeshTCone / MeshCylinder: A new Cap option has been added for making open mesh objects.
• Paraboloid: The Cap option has been renamed to Solid.
• SetOneDaySunAnimation: A dialog box for settings has been added.
• SetOneDaySunAnimation: An option to not run the HTML viewer has been added.
• SetSeasonalSunAnimation: A dialog box for settings has been added.
• TCone: A new Cap option determines whether the truncated cone is created as a solid with the top and bottom surface attached or an open surface.
• Tube: A new Cap option determines whether the cylinders are created as a solid with the top and bottom surface attached or open surfaces.

• FilletEdge: 명령 실패 오류가 수정되었습니다.
• MaterialEditor: 재질 설정이 올바르게 저장되지 않았습니다. 이것이 수정되었습니다.
• Open:STEP: Files created with ProE had parts moved from their original position. This is fixed.
• Pipe 크래시가 수정되었습니다.
• SelBoundary: 명령 실패 오류가 수정되었습니다.

• CamerasOff: New command - Removes all cameras that were displayed by the CamerasOn command, without deleting their associated named views.
• CamerasOn: New command - The new camera system adds the ability to show camera widgets that manipulate named views. The CamerasOn command creates camera icons for all named views. A properties page can change the camera's (named view's) properties, and floating viewports can be opened that show the named views and allow them to be edited in real time.
• DraftAnglePoint: New command - Places a point object on a surface at a location near the pick point where the surface's draft angle matches the input value. The tool is designed primarily to help draw curves along surfaces where the surface has a given draft angle.  Mold makers in particular can use this to mark off the limits of where an object can be cleanly pulled from a mold. They would then build tangent surfaces from the curves to parting plane or surface.

• Render crash fixed.
• Weight: A few problems with the display in the Weight dialog box have been fixed.

• IronPython: A crash that occured when the user attempted to launch a browser with a URL has been fixed.
• Join command crash fixed.
• Lasso, SelBrush, SelCircular, SelBoundary, SelVolumeBox, and SelVolumeSphere incorrectly did not report the number of objects added to the selection. This is fixed.
• Open:OBJ: A problem with reading texture coordinates has been fixed.
• Osnap:Int: Int osnap could be slow when there are many blocks within the snap radius. This has been improved.
• SelBrush did not work properly when selecting objects to trim. This is fixed.
• Surface/Surface intersection: A problem with intersecting trimmed surfaces has been fixed.
• TextObject: A problem with setting open curves has been fixed.

• Layer: Options for Linetype and PrintWidth have been added to the scripting version of the Layer command.
• Open command crash fixed.

• Backspace key (labeled Delete on a macbook) works as Delete if the command line is empty.
• BlockEdit: New command - Allows editing a block in place to change the geometry and sub-blocks.

• Layer: New List and Select options have been added to the scripting version of the Layer command where selecting a layer name or an object to indicate the layer is appropriate.
• Tube: A new WallThickness option has been added for selecting the tube thickness.

• 64-bit Rhino 5.0 failed to start displaying the "Unable to communicate with license manager" error. This is now fixed.
• Crash in SafeMode with command help fixed.
• FilletEdge: Failure bug fixed.
• NamedView: New Animate option enables animation of the NamedView Restore.
• Project: The Loose option did not support History. This is fixed.

• LooseProject: The LooseProject command has been incorporated as an option to the Project command.
• Project: A new Loose option has been added.

• Layer: If the current layer is collapsed under a parent layer, the parent layer name is now bold to indicate that the current layer is under the parent.
• Menu: BlendCrv has been added to the menu.
• Open:FBX: A crash bug with Max 2009 has been fixed.
• Pull: a new Loose option has been added.
• SelBoundary, SelCircular, SelVolumeBox, SelVolumeSphere: Incorrectly also selected block instances, even if they were outside the boundary. This is fixed.
• SelBoundary: The prompts have been tuned up to make it more clear that only objects within a viewport can be selected.

• MergeAllEdges: Merges all qualified edges of a surface or polysurface.

• Import:LWO: A new Options button opens a dialog box for setting the options.

• ArrayLinear: No allows setting the direction for the array.
• Autogumball: The gumball widget behavior has been improved.
• Dir command crash fixed.
• ExtrudeCrvTapered: A problem with the extrusion angle has been fixed.
• RailRevolve: The experimental command RailRevolveEx has replaced RailRevolve. The the RailRevolve command has been renamed RailRevolveOld and does not autocomplete.
• Surface/Surface intersection: Several failure bugs have been fixed.
• Texture Mapping: Prompts and placement options have been updated.
• ZoomSelected will now zoom to highlighted objects such as the objects highlighted as trimming objects.

• RenderConvertOldStyleMaterials 명령이 추가되었습니다.

• Open:SKP: Weld options added.
• PictureFrame: A setting for self-illumination has been added.
  
• PolygonCount now asks for a selection.  Pressing Enter selects the whole model.
• Select: New feature - Mesh face highlight. Highlighted mesh sub-faces are now "shaded" using flat shading and the "selected object" color.  This is done even if in Wireframe mode(s).
• Sphere: The FitPoints option now accepts grips as well as point objects as input.
• What: When annotation text is selected, What now lists Windows font name instead of a Font index number.

• ArcBlend: A failure with parallel lines has been fixed.
• BooleanSplit: A problem that created nonmanifold objects has been fixed.
• Display: A problem with picking in custom display modes has been fixed.
• Display: A problem with mesh vertex color display has been fixed.
• Display: World axes icon did not properly display color in a Perspective viewport. This is fixed.
• EditScript: In Tools>Options>Header, it was impossible to cut, copy or paste text in the window. This is fixed.
• ExtrudeSrf: A crash when extruding hole edges has been fixed.
• FlatShade: A problem with meshes appearing smooth in FlatShade mode has been fixed.
• Gumball: AutoGumball 크래시가 수정되었습니다.
• Hatch 크래시가 수정되었습니다.
• MappingOn: Dragging grips on a mapping widget caused a crash. This is fixed.
• MeshBox: In some cases, the box did not properly use the input values. This is fixed.
• Open:DWG/DXF: Units no longer revert to mm after each import.
• Open:SKP: 크래시가 수정되었습니다.
• RecordAnimation: The filenames sometimes had an extra dot before the extension. This is fixed.
• Save:IGES: Option button added to Save dialog box.
• SetOneDaySunAnimation: A problem wit the model location settings has been fixed.
• Sweep1: A problem with creating a surface with bad shape blending has been fixed.
• Technical Display: Control point dragging caused Rhino to hang. This is fixed.

• Import/Export: 파일 열기, 내보내기 대화 상자에 가져오기 (.obj, .skp, .stl, 3ds) 또는 내보내기 (.stp, .sat, .x_t) 옵션이 있는 파일 유형 단추가 추가되었습니다.
• Properties: 매치 대화상자에 해치 개체가 포함되었습니다.

• Display: 원점에서 멀리 떨어진 개체의 디스플레이 문제가 수정되었습니다.
  
• Loft: 선택 순서와 관련된 문제가 수정되었습니다.

• AutoGumball: 개체가 미리 선택되면 언제나 Gumball 을 자동으로 켭니다. 상태 표시줄에 "Gumball" 창에서 이 기능을 켜고 끌 수 있습니다. 두 가지 Gumball 스냅 모드가 있습니다. "Snappy"는 개체 스냅이 켜져 있을 때 실행됩니다. "Smooth"는 개체 스냅이 꺼져 있을 때 실행됩니다.
  

• EditScript: New 탭을 클릭하면 New 메뉴와 도구모음 항목과 같은 결과를 얻게 됩니다.
• EditScript: 하나 이상의 스크립트가 로드되었을 때 Ctrl+Tab 키를 누르면 순서대로 활성화됩니다.
• OffsetPolysurface: 새로운 Join 옵션이 추가되었습니다.

• Select: 개체의 일부가 뷰포트 카메라 뒤에 있는 경우 올바르게 선택되지 않았습니다. 이것이 수정되었습니다.
• SuperExplodeBlock: 비균일하게 크기가 변경된 블록에서 실행되지 않았습니다. 이것이 수정되었습니다.
• Sweep2: 몇 가지 명령 실패 오류가 수정되었습니다.

• ArrayLinear: 새 명령 - 하나 이상의 개체를 하나의 치수로 배열하거나 균일하게 배치합니다.
• BoxEdit: 새 명령 - 경계 상자를 기준으로 개체의 크기, 배율, 위치를 변경하고 회전시킵니다.
  
• ConvertDots: 새 명령 - Dot 명령으로 만들어진 도트 개체를 점 또는 텍스트 개체로 변환합니다.
• DupDimStyle: 새 명령 - 기존 스타일을 복사하여 새로운 스타일의 치수를 만듭니다.
• Eval: 새 명령 - 명령행에 입력하여 그 결과를 반환합니다.
• IdleProcessor: 새 명령 - 사용자가 지정한 시간 동안 사용하지 않으면 원하는 명령이 실행되도록 지정할 수 있습니다. 예를 들어, 현재 문서를 자동으로 저장하도록 설정하거나, 시간이 오래 걸리는 렌더링을 시작하도록 지정할 수 있습니다.
• ImportDimStyles: 새 명령 - .3dm 파일의 치수 스타일을 현재 문서로 가져옵니다.
• MatchCrvDir: 새 명령 - 선택된 커브를 지정된 커브의 방향에 맞춥니다.
• ModifyRadius: 새 명령 - 기존의 호와 원의 반지름을 변경합니다.
• ReplaceBlock: 새 명령 - 블록 인스턴스의 기저 블록 정의를 교체합니다.
• RevCloud: 새 명령 - 구름형 폴리선 커브를 그립니다.
• SelDimStyle: 새 명령 -치수 스타일을 기준으로 치수 개체를 선택합니다.
• SelHatch: 새 명령 - 해치 개체를 선택합니다.
• SelNonManifold: 새 명령 - 비(非)다양체 서페이스와 폴리서페이스 개체를 선택합니다.
• SelRenderColor: 새 명령 - (확산) 렌더링 색상에 따라 개체를 선택합니다.
• SplitCrv: 새 명령 - 커브를 여러 개의 세그먼트로 분할합니다.
• SuperExplodeBlock: 새 명령 - 블록을 구성 요소 개체로 분해합니다 (중첩된 블록도 포함).
• SynchronizeRenderColors: 새 명령 - 현재 디스플레이된 색상에 일치하도록 개체 (확산) 재질 색상을 업데이트합니다.
• UnjoinEdge: 새 명령 - 선택된 폴리서페이스의 가장자리를 결합 해제합니다. 닫힌 서페이스의 심은 결합 해제되지 않습니다.

• Print: Print Window Select 기능이 개선되었습니다. Print 대화 상자에 4 버전의 "New"와 "Move" 단추 대신, "Set" 단추가 추가되었습니다. 인쇄창에 이동과 크기 조정이 가능한 그립이 있습니다. 그립을 클릭하지 않으면 새 창이 4 버전에서와 비슷하게 정의됩니다.
  

• OffsetPolysurface 크래시가 수정되었습니다.
• Print: Print 대화 상자의 "View and Output Scale" 페이지에 여러 개의 레이아웃 페이지를 인쇄할 때 사용하는 "Multiple pages" 와 "All pages" 옵션이 추가되었습니다.Multiple Pages 옵션에는 인쇄하려는 페이지의 목록을 입력할 수 있습니다. Note: Multipage 인쇄는 프린터에 하나의 인쇄 작업으로 전송됩니다. PDF 로 인쇄하는 경우, 여러 장이 담긴 하나의 PDF 파일을 결과물로 얻게 됩니다.
  
• Select: 음영 처리된 개체 뒤에 있는 개체가 잘못 선택되었던 오류가 수정되었습니다.

• ApplyCustomMapping: 새 명령 - 사용자가 지정한 텍스처 매핑을 만듭니다.
• LooseProject: - 새로운 명령 - 기존 커브의 편집점을 서페이스에 투영시켜, 원래 커브와 같은 구조를 가졌으나 투영된 편집점이 있는 커브를 만듭니다.   편집점이 서페이스에 투영되지 않으면 명령이 실행되지 않습니다. 새 커브가 서페이스 상에 있거나 그 근처에 있게 될지는 알 수 없습니다. 편집점만이 서페이스 상에 있게 됩니다.

• ApplyBoxMapping: 새로운 Capping 옵션이 추가되었습니다.
• Circle: FitPoints 옵션에서 제어점을 입력 개체로 사용할 수 있게 되었습니다.
• Print: 새로운 잠긴 개체 인쇄 옵션이 추가되었습니다.
• 텍스처 매핑: 매핑 위젯을 삭제하면 개체의 텍스처 매핑이 삭제됩니다.

• ApplyBoxMapping: 서드 파티 플러그인에서 만들어진 일부 메쉬의 텍스처 매핑 개체 속성 대화상자에서 "Custom"을 선택하면 텍스처 좌표 데이터가 사라졌습니다. 이것이 수정되었습니다.
• DupEdge / DupBorder: 선형 가장자리로부터 유리(rational) 선이 잘못 만들어졌습니다. 이것이 수정되었습니다.
  
• EditScript: 대시가 있는 버전 (-EditScript)이 편집기에서 활성화된 스크립트로 실행됩니다.
• EditScript: Ctrl+Shift+U 키를 눌러 주석을 제거하면 선택 영역이 대문자로 변환되었습니다. 이것이 수정되었습니다.
• ExtractIsocurve: 선형 가장자리로부터 유리(rational) 선이 잘못 만들어졌습니다. 이것이 수정되었습니다.
• MappingOn: 매핑 기능을 해제하는 단추 (Properties > Texture Mapping) 가 매핑 위젯이 켜진 상태에서 잘못 해제되었습니다. 이것이 수정되었습니다.
• Open:STEP: STEP 가져오기 기능이 향상되었습니다.
• XP에서 실행 시 문제점: 2009년 6월 9일 빌드가 Windows XP 에서 올바르게 시작되지 않았습니다. 이것이 수정되었습니다.
• 텍스처 매핑: 매핑 투영 매개변수가 서로 다른 투영에서 유지되지 않았습니다. 이것이 수정되었습니다.
• 텍스처 매핑: 스피너 제어를 다시 사용하실 수 있습니다.

• 마우스 작업: 초점 이동 작업을 시작한 후, Shift 키를 눌러 초점 이동 시 방향을 수평/수직으로 잠글 수 있습니다. 이것은 Shift+마우스 가운데 단추로 하는 작업이 아닌, 마우스 오른쪽 단추 또는 마우스 가운데 단추를 눌러 초점 이동을 하는 경우만 해당됩니다. Shift+마우스 오른쪽 단추를 눌러 초점 이동을 시작한 후, 초점 이동 도중에 Shift 키를 놓았다면, Shift 키를 다시 눌러 수직/수평 방향으로 잠글 수 있습니다.
  
• ShowSelectedInDetail: 새 명령 -이 명령은 HideInDetail 명령의 실행으로 숨김 상태가 된 개체에서만 실행된다는 점을 제외하고는 ShowSelected 명령과 비슷합니다.

• HideInDetail: 활성/비활성 디테일을 포함/제외시키는 옵션이 새롭게 추가되었습니다.

• 부울 연산 기능이 Rhino의 예전 버전보다 향상되었습니다. 부울 연산이 잘 실행되지 않는 경우, 샘플 파일을 보내 주세요.
• BooleanDifference 크래시 오류가 수정되었습니다.
• ClippingPlane: Viewport 메뉴에 추가되었습니다.
• Layout: 디테일 뷰의 테두리를 움직여 크기와 종횡비를 변경할 때, 조정된 디테일 프레임에서 더 이상 뷰가 중심을 재설정하지 않습니다.
• Sweep2: 자동 심 조정이 올바르게 실행되지 않았습니다. 이것이 수정되었습니다.

• IronPython: New experimental scripting language for Rhino V5 is an implementation of the Python scripting language that has full access to the .NET SDK. The IronPython command displays a script editor for writing python scripts.
  
• MatchMapping: 새 명령 - 선택된 개체의 텍스처 매핑 속성을 다른 지정된 개체에 맞춥니다. 텍스처 매핑 대화상자에 Match 단추가 표시됩니다.
• SeparateMapping: 새 명령 - 공유 매핑을 분리하여 각각의 개체에 개별적인 매핑 위젯을 설정합니다.

• ExtrudeCrv: 새로운 ToBoundary 옵션이 추가되었습니다.

• Display: 디스플레이 엔진과 관련한 몇 가지 문제가 해결되었습니다.
• EditScript: 붙여넣기가 올바르게 실행되지 않았습니다. 이것이 수정되었습니다.
• ExtrudeCrv이 서페이스 가장자리에서 실행되지 않았습니다. 이것이 수정되었습니다.
• ExtrudeCrv: 사용자가 지정한 구성평면에서 작업이 올바르게 실행되지 않았습니다. 이것이 수정되었습니다.
• Import: Open 대화상자에 Options 단추가 추가되어 가져올 파일 유형과 옵션을 선택할 수 있습니다.
• Print: 정확한 색상으로 인쇄할 때의 문제점과 잘못된 크기와 관련된 오류가 수정되었습니다.
• Sweep2: 비틀린 서페이스를 만들 때의 문제점이 해결되었습니다.

• ExtractAnalysisMesh: New command - Extracts an analysis mesh from an object. For example, use the CurvatureAnalysis command and then run ExtractAnalysisMesh to add the analysis mesh (with the vertex colors) to the document.
  
• SetView: 새로운 Two-Point Perspective 옵션이 추가되었습니다.
• ViewportProperties: New Two-Point Perspective option.

• Line, Normal: Now only asks for surfaces when IngoreTrims=Yes. You can still pick individual surfaces in a polysurface.
• MappingOn: Texture now updates in real time when widgets are moved or spinners on the mapping dialog are dragged.
• MappingOn: The PointsOn command now turns mapping widget grips on.
• OBJImportOptions command has been removed in favor of an options button on the File Open dialog. 

• BooleanDifference 크래시 오류가 수정되었습니다.
• DocumentProperties: The decimal-number-accepting edit boxes now support entering the number in fractional format. The number gets converted to decimal as soon as Rhino refreshes the edit box, but at least you can now type numbers like 1/256 and 3/8 without having to do the math yourself.
• EditScript: 대화상자의 Save 단추가 올바르게 실행되지 않았습니다. 이것이 수정되었습니다.
• Extrude did not work properly using edges. This is fixed.
• ExtrudeCrvTapered: When extruding planar curves, planar surfaces are created where possible instead of adding polysurface segments to the edges.
• Layout: 디테일 뷰에서 뷰를 올바르게 변경할 수 없었습니다. 이것이 수정되었습니다.
• NewFloatingViewport: Perspective 투영에서 뷰포트 탐색을 사용할 수 없었습니다. 이것이 수정되었습니다.
• Open:DWG/DXF 크래시가 수정되었습니다.
• Open:SolidWorks 크래시가 수정되었습니다.
• OrientOnSrf: Copy 옵션이 Rhino 세션 중에 올바르게 유지되지 않았습니다. 이것이 수정되었습니다.
• Render: 디스플레이 엔진에서 찾을 수 없는 텍스처를 사용하여 모든 프레임을 이미지로 만들었습니다. 이 오류로 인해 메모리 부족 현상이 발생하였습니다.
• Split 크래시 오류가 수정되었습니다.
• Sweep2: 일부 경우, 비틀린 서페이스가 잘못 생성되었습니다. 이것이 수정되었습니다.
• 텍스처 매핑: 텍스처 매핑 인터페이스가 업데이트되었습니다.
• Trim 크래시 오류가 수정되었습니다.

• ArcBlend: New command - Creates a blend curve consisting of two arcs between two curves with adjustable endpoints, and with bulginess adjustment, similar to BlendCrv. It it also similar to Convert, using the same method for connecting two points and directions with two tangent arcs.
• ContentBrowser 명령이 추가되었습니다.
• ContentBrowser: New command - Opens the rendering Content Browser from the command line.
• CreateRegions: New command - Takes a nonmanifold polysurface and replaces it with all solid manifold regions defined by the surfaces of the input. If no solids are defined, the input will disappear. It is under develpoment and the interface will change.
  
• EnvironmentEditor 명령이 추가되었습니다.
• FilletSrfCrv: New command - Takes a surface, a curve, and a distance, and creates the rolling ball fillet between the surface and curve. 
• MaterialEditor 명령이 추가되었습니다.
• MergePolysurfaces: New command - takes a set of surfaces or polysurfaces and combines them into a single, probably nonmanifold, polysurface with edges at the intersections of the input. This command is recommended for expert users since it creates geometry that may not be desirable as an end result, but could be valuable as an intermediate step in a larger process.
• OBJImportOptions: New command - Provides dialog box and command line options for controling elements imported from OBJ file formats.
• OffsetPolysurface: New command - takes a polysurface, a distance, and a direction and offsets the surfaces of the polysurface by the distance in the chosen direction. The offset surfaces are trimmed to their intersections. If adjacent surfaces offset away from each other, the gaps are filled with circular blends. The resulting surfaces are not joined. This command is a low level tool for use when ShellPolysurface fails or when attempting to thicken an open polysurface. 
• PolygonCount 명령이 추가되었습니다.
• RailSrfCrv: New command - Takes a surfaces, a curve, and a distance, and returns the curve on the input surface that is the edge of the rolling-ball fillet between the curve and the surface.  This curve is useful as a trimming curve when attempting to shell a polysurface by hand.
• RailSrfSrf: New command - Takes a pair of surfaces and a distance, and returns the curves on the input surfaces that are the edges of the rolling-ball fillet between the surfaces,  These curves are useful as trimming curves when sheeling a polysurface by hand. 
• RenderDeleteTexture 명령이 추가되었습니다.
• RenderDocumentRenderingOptions 명령이 추가되었습니다.
• RenderDuplicateEnvironment 명령이 추가되었습니다.
• RenderDuplicateMaterial 명령이 추가되었습니다.
• RenderDuplicateTexture 명령이 추가되었습니다.
• RenderGroundPlaneOptions 명령이 추가되었습니다.
• RenderInstanceSimilarContent 명령이 추가되었습니다.
• RenderLoadEnvironmentFromFile 명령이 추가되었습니다.
• RenderLoadMaterialFromFile 명령이 추가되었습니다.
• RenderLoadTextureFromFile 명령이 추가되었습니다.
• RenderOpenLastRendering 명령이 추가되었습니다.
• RenderPostEffectPlugInOptions 명령이 추가되었습니다.
• RenderRemoveUnusedMaterials 명령이 추가되었습니다.
• RenderRenameEnvironment 명령이 추가되었습니다.
• RenderRenameMaterial 명령이 추가되었습니다.
• RenderRenameTexture 명령이 추가되었습니다.
• RenderRenderingOptions 명령이 추가되었습니다.
• RenderSafeFrameOptions 명령이 추가되었습니다.
• RenderSaveEnvironmentToFile 명령이 추가되었습니다.
• RenderSaveMaterialToFile 명령이 추가되었습니다.
• RenderSaveTextureToFile 명령이 추가되었습니다.
• RenderSunOptions 명령이 추가되었습니다.
• ShellPolysurface: New command - creates a hollowed out shell from a solid.  It only operates on solid, manifold polysurfaces. These surfaces are removed and the remainder is offset inward, using the outer parts of the removed surfaces to join the inner and outer parts. 
• SunDockBar 명령이 추가되었습니다.
• SunLight 명령이 추가되었습니다.
• TexturePalette 명령이 추가되었습니다.
• ViewDockBar 명령이 추가되었습니다.

• Arc, Length: Added feedback to draw the center, startpoint, and the arc as you pick the length.
• BooleanDifference: A failure bug has been fixed.
• Properties: The ability to match Hatch properties has been added.
• Split: New self-intersection code has been implemented that affects the Split command. This affects surfaces with several things that intersect each other and self-intersecting curves.
• Toolbars: Right-click options have been added to the toolbar buttons to use the Repeat function for the Fillet and Chamfer commands.

• Arc: Ortho did not work properly for the last pick. This is fixed.
• BooleanDifference 크래시 오류가 수정되었습니다.
• BooleanUnion crash fixed.
• Cap: A bug that allowed the normals to point inward has been fixed.
• Display: Several bugs that caused highlighted objects to display incorrectly have been fixed.
• EditScript: Several bugs have been fixed:
  
  • Run selected portion of code did not work
  • Cursor shortcuts added : Ctl+Home, Ctl+End, Ctl+Shift+Home, Ctl+Shift+End
  • Save problem
• Intersect 크래시가 수정되었습니다.
• PictureFrame: When prompted for the "First corner", typing a single "0" was ignored instead of being interpreted as 0,0 as it is in V4. This is fixed.
• PrintDisplay: Incorrectly displayed everything white. This is fixed.
• Toolbar: Tooltips for the Bump map toolbar button were incorrect. This is fixed.
• Trim 크래시 오류가 수정되었습니다.

• RenderAddEnvironment 명령이 추가되었습니다.
• RenderAddMaterial 명령이 추가되었습니다.
• RenderAddTexture 명령이 추가되었습니다.
• RenderBlowup 명령이 추가되었습니다.
• RenderChangeEnvironment 명령이 추가되었습니다.
• RenderChangeMaterial 명령이 추가되었습니다.
• RenderChangeTexture 명령이 추가되었습니다.
• RenderDeleteEnvironment 명령이 추가되었습니다.
• RenderDeleteMaterial 명령이 추가되었습니다.

• Arc: 음의 값을 길이로 사용할 수 있습니다. 음의 값을 사용하면 현재 방향과 반대가 되도록 설정됩니다.
• Layer: 뷰포트마다 레이어를 켜거나 끌 수 있습니다.
• Rotate: 참조점을 배치하기 위해 피드백 원에 스냅할 수 있습니다.

• Animation tools: 파일 손상의 원인이 된 오류가 수정되었습니다.
• Copy 크래시가 수정되었습니다.
• Layer: Trailing white spaces are now automatically stripped from layer names instead of displaying an error message.
• MakeHole 크래시가 수정되었습니다.
• MakeHole: 커브를 미리 선택할 수 없었습니다. 이것이 수정되었습니다.
• Mirror 크래시가 수정되었습니다.
• OffsetPolysurface 크래시가 수정되었습니다.
• RenderCreateRenderFrame 명령이 추가되었습니다.
• RenderPreview 크래시가 수정되었습니다.
• Repeat 크래시가 수정되었습니다.
• ShellPolysrf: 메쉬 처리가 불가능한 개체가 잘못 만들어졌습니다. 이것이 수정되었습니다.
• ShellPolysurface 크래시가 수정되었습니다.
• SnapToLocked: 이 명령이 복원되어 명령행에서 입력 시 자동완성됩니다.
• SolidPtOn: 일부 크래시 오류가 수정되었습니다.

• EnterEnd: New command -Ends command scripts that would require multiple Enters to end.
• IronPythonInteractive: New command - allows you to directly type a Python script at the command line and have it immediately interpreted.
• Open:STL- New dialog box controls the geometry from the STL file format. The Weld option determines whether the mesh will be welded automatically on import. The WeldAngle option sets the angle at which the automatic weld will be performed.  The Split option determines whether disjoint pieces of a mesh will be automatically split up on import.
• Osnap: Osnaps now show object perpendiculars and object tangents. If the base point of a move or drag operation is snapped to an end or mid point of a curve or edge, there is an "Object perp" or "Object tan" flag available indicating when the curve or surrface edge is perpendicular to a target curve or edge. This is in addition to the usual Perp and Tan flags that show up when the trajectory of the move or drag is perp to a curve or edge.
• RebuildUV: New command - Rebuilds a surface in either the u- or v-directions independently.
• VertexColorCreator: New command - Evaluates material texture properties for each mesh texture coordinate and sets a vertex color with the corresponding color. 

• Fillet/Chamfer: Now continue to ask for curves even if the last pair failed.
• Help:
  
  • 32- and 64-bit versions available now.
  • Video files now load on demand when the topic is opened.
  • The videos in the 64-bit versions do not play because there is no 64-bit flash player. We hope to resolve this problem in the near future.
  • Topics are divided into single subjects for the most part.
• Layer: The layer dialog now displays a warning message if you attempt to turn off or lock the parent of the current layer.
• Osnap: You can now press Alt before starting to drag to disable/enable osnap for the drag base point.
• SpaceBall/SpaceMouse support: New settings Dolly-zoom perspective views and Rotate about the camera.

• 크래시 수정:
  
  • Hatch
  • Loft
  • MakeHole
  • ShellPolysurface
• MakePeriodic: Incorrectly made an already periodic curve nonperiodic. This is fixed.
• Properties: A problem updating the Properties dialog box when an object's layer was hidden has been fixed.
• Stretch: New Length option allows input of a single number as the stretch axis's new length.
• Zoo: Now supports Rhino V5 CD keys.

• Installer: RhinoScript failed to install properly with the 22-Apr-2009 WIP release. This is now fixed.
• Installer: ThinWall plug-in is now installed. This plug-in contains a very early prototype of Rhino 5.0 Shelling.

• SolidPtOn: New command - Turns on control points for closed solids.

• Revert: Warning message added.
• Save:WMF: Enhanced metafile format (.emf) can now be saved.

• BooleanDifference: 선택 순서와 관련된 오류가 수정되었습니다.
• BooleanDifference: 잘못된 개체를 만들었던 오류가 수정되었습니다.
• BooleanDifference: 비다양체 개체와 관련된 오류가 수정되었습니다.
• BooleanDifference: 다양항 명령 실패 오류가 수정되었습니다.
• BooleanUnion: Several failure bugs have been fixed.
• Cap: A problem with the direction of a capped solid has been fixed.
• CopyLayout: The new layout did not draw until after you pan the viewport. This is fixed.
   
  
• CPlane, Object option: Sub-object picking was incorrectly not permitted. This is fixed.
• EditScript: Options dialog crash fixed.

• Export:

  • Did not accept V5 as the target file type. This is fixed.
  • Crash fixed.
• PictureFrame: The display mode setting incorrectly affected selecting curves. This is fixed.
• Print: An error message now explains that the New button is not available when the Scale is set to Scale to Fit.
• Render crash fixed.
• RhinoStart: The Install button incorrectly launched the previous Rhino version. This is fixed.

• AddToGroup이 메뉴에 추가되었습니다. Edit->Groups->Add To Group.
• Crosshair: 디스플레이 정밀도가 향상되었습니다.
• Curve: 새로운 PersistentClose 옵션.
• Help: 도움말 동영상 로드 속도가 향상되었습니다.
• NewFloatingViewport: New CopyActive default option copies everything about the active viewport into the new floating viewport.
  
• Polyline: 새로운 PersistentClose 옵션.
• Rebuild: Toggle 옵션이 추가되었으며, Loft 명령과 유사하게 Type=Normal/Loose/Tight/Straight/Uniform 옵션이 생겼습니다.

• BooleanIntersect: Several failure bugs have been fixed.
• CopyViewportToDetail를 실행하면 뷰포트로 설정된 클리핑 면이 레이어에 새롭게 생성된 디테일 뷰에 첨부되지 않았습니다. 이것이 수정되었습니다.
• EditScript: 올바르게 로드되거나 종료되지 않았습니다. 이것이 수정되었습니다.
• Intersect: 커브와 커브끼리의 교차가 실행되지 않았던 오류가 수정되었습니다.
• Mirror 크래시가 수정되었습니다.
• Move 크래시가 수정되었습니다.
• OffsetPolysurface 크래시가 수정되었습니다.
• Open:STEP/Save:STEP 이 64 비트 릴리스에 포함되지 않았습니다. 이것이 수정되었습니다.
• Print: 래스터 인쇄 시 타일 사이의 경계선이 보였습니다. 이것이 수정되었습니다.
• ToggleFloatingViewport: 플로팅 상태가 아닌 뷰포트가 일부 경우 계단식 배열이 이루어지지 않았습니다. 이것이 수정되었습니다.

• ContinueCurve: New command - The curve picks up as if you were still in the original curve creation command.
• ContinueInterpCurve: New command - The curve picks up as if you were still in the original curve creation command.
• CreaseSplitting: 새 명령 - 기본 설정에 의해, Rhino 서페이스 생성 명령 (ExtudeCrv, Loft, Sweep) 은 꼬임이 있는 입력 개체를 사용하게 되면 꼬임에 대응하는 가장자리를 가진 폴리서페이스를 결과물로 얻게 됩니다. CreaseSplitting 명령은 이것을 변경합니다. If the option SplitAlongCreases=No the result is a single surface; if SplitAlongCreases=Yes, a polysurface will be the result.
  
• DigLine: New command: When a point is picked with the digitizer, a line is drawn starting at the probe tip and ending Length units away from the tip, in the direction opposite the probe direction vector.
• EnableClippingPlanes/DisableClippingPlanes: New commands - Turns clipping plane effect off/on for all clipping planes in the current viewport. 
• ExtractCurvatureGraph: 새 명령 - 곡률 그래프인 커브 개체를 만듭니다(곡률 그래프에서 커브로 이어지는 가는 선 없이). 예를 들어 커브에 꼬임이 있는 등의 이유로 곡률 그래프가 비연속적인 경우, 이 명령을 사용하면 여러 개의 출력 커브가 만들어집니다.
• HatchBase: New command - Sets the starting point of the pattern for existing hatches.
• IntersectTwoSets: New command - Variation of Intersect command - allows selecting two sets of objects for finding intersections. The command only find the intersection between the two groups, ignore intersection between objects in the same group.
  
• MirrorHole: New command - mirrors holes in polysurface.
• New sub-menu selection for objects. Edit->Select Objects->Area and Volume Select, and put Lasso there since it now selects all objects and not just points.
  

• PercentageSnap - New one-shot object snap:

  • Prompts for an end to snap from and a percentage. The curve is marked with temporary points that are automatically snapped to.
  • If the percentage is less than 50, you get multiple snap points. For example if you type 30, you get snap points at 30%, 60% and 90%.
• PopupPopular: 새 명령 - PopupMenu와 유사하게 실행되지만, 가장 많이 사용된 15 개의 명령이 담긴 메뉴를 가장 많이 사용된 순서로 팝업 표시됩니다.
  
• Repeat: New Command - Specify by typing or selecting a command or macro from a list.
• ScaleByPlane - New Command: A non-uniform Scale2D. Options: Copy (similar to the other Scale commands), and construction plane selection.
• SelBoundary: New command - Selects objects based on a boundary defined by a closed polyline.Selection is based on the curves apparent shape relative to the view, not it's 3-D shape or a projection from the construction plane.
• SelBrush: New commmand - Selects objects based on painting a thick brush stroke. It supports click'n'dragging or repeatedly clicking to draw the stroke. By default it uses crossing select: Objects touched by the stroke are selected. There is a SelectionMode=Window/Crossing/InvertWindow/InverCrossing command option for controlling the behavior.  BrushWidth setting controls the brush width in pixels. Initially the default width is 40.
• SelBrushPoints: 새 명령 - SelBrush 명령과 유사하지만 선택 개체 피드백이 실시간으로 표시됩니다. Since it has be really fast, it can only work on objects that are easy to test, like points and control points.
  SelBrushPoints added to menu, Edit->Control Points->Select Control Points->Brush. 
• SelCircular: New command - Works like SelWindow/SelCrossing, but the selection area is circular instead of rectangular.
• SelClippingPlane: New command - Selects all clipping planes.
• SelectFilter: 새 명령 - 개체스냅 대화상자와 유사하게, 기본 개체 유형을 선택/선택해제할 수 있는 대화상자가 표시됩니다.
  For now, the types are points, curves, surfaces, polysurfaces, meshes, lights, annotations, blocks, control points, point clouds, hatches and others (= esoteric object types).
  Press Shift or Ctrl, to activate one-shot pick filters that work postpick when running commands that ask for objects. They are idential to typing "crv", "srf" etc. at the command prompt.
• SelVolumeBox: New command - Selects objects inside, outside or crossing a box-shaped volume. Added to menu, Edit->Select Objects->Area and Volume Select->Box.
• SelVolumePipe: New command - Selects objects inside, outside or crossing a pipe shaped volume. Added to menu, Edit->Select Objects->Area and Volume Select->Pipe. 
• SelVolumeSphere: New command - Selects objects inside, outside or crossing a spherical volume. Added to menu, Edit->Select Objects->Area and Volume Select->Sphere.
  
• VPoint: New command - Specifies the viewing angle as a vector from a specified point to 0,0,0.
• ZoomNonManifold: New command -  Paints, marks, and zooms in on non-manfold edges of polysurfaces and meshes, following the behavior of the ZoomNaked command.

• 3DFace: Added dynamic feedback wires connecting the picked points to give an indication in what order the points should be picked.
• Analysis commands that show numbers that are not distances (Angle, EvaluateUVPt, Distance (the angles), GCon, Domain) now pay attention to the precision setting on the Document Properties, Units page.
• Angle: A new TwoObjects option measures the angle betwen two planar surfaces or two lines.
• Angle: Added support for preselected line and planar surface and plane and plane combinations.

• Arc:

  • New Length option allows defining an arc by center, start, and arc length.
  • New Start, Center, Angle option.
• Array: Array now automatically previews the result instead of having an optional preview.
• Arrow key behavior: Arrow keys now always pan in plan view parallel viewports instead of rotating the view. Accidental rotation of the view caused problems.
• BoundingBox: New option Output=Solids/Meshes/Curves/None.
• ChangeDegree/Rebuild/FitSrf: U and V direction indicators have been added.
• CheckMesh has been added to the Mesh > Mesh repair menu.
• Circle 3Point: A new Radius option allows drawing a circle through two points with a defined radius similar to the Arc command Start-End-Radius option.

• ClippingPlane:

  • Clipping planes will always display in all views unless they are hidden or on a hidden layer just like other Rhino objects.
  • Now automatically uses the active viewport when the command starts instead of requesting one.
  • Object properties page added for clipping planes to set direction and views affected.
  • You can now print clipped geometry in vector format.
• Command prompt: Now backspace always erases the last typed character, overriding autocomplete.
• CommandHelp: Supports fuzzy string search identical to command autocomplete. So now you do not need to worry about the spelling.
  
• ContinueCurve가 메뉴에 추가되었습니다. Curve->Free-Form->Continue Control Point Curve.
  
• ContinueInterpCrv가 메뉴에 추가되었습니다. Curve->Free-Form->Continue Interpolated Curve.
• Convert: The converted curve now maintains the attributes of the input curve.
• Copy option: The state of the Copy option for these commands is now remembered: Rotate, Rotate3D, Scale, Shear, Scale1D, Scale2D, ScaleNU, Orient, Orient3Pt, Mirror, OrientOnCrv, OrientCurveToEdge, RemapCPlane, Twist, Bend, Taper, Flow, FlowAlongSrf.

• CPlane

  • Surface: New IgnoreTrims option uses the entire untrimmed surface for determining the construction plane orientation.
  • The Object option now allows clipping planes to be selected in addition to curves and surfaces.
• Curvature: Automatically snaps to curve inflection points (where the sign of the curvature changes.)
• CurvatureGraphOn: Now colors for u- and v-directions can be specified separately. New edit boxes allow typing the scale and density as well as incrementing the numbers.
• Delete: Pressing the Delete key will now remove a row of selected surface control points.
• DeleteSubCrv: Alias added for the old BreakCrv command.

• Dir:

  • Allows selection of more than one object.
  • Recognizes clipping planes and allows flipping.
• DupEdge: Single mesh polygon edges can now be duplicated.
• Edit Points can now be deleted.
• Ellipse: New MarkFoci option works on open and closed elliptic and circular curves.
• Export:DWG/DXF: Any curve that gets collapsed to a point or that is already collapsed to a point is skipped when writing dwg/dxf files.
• ExportOptions/ImportOptions: Now include advanced display mode settings.

• Extend:

  • Typing a negative number now shortens the curve.
  • The boundary object can now be pre-picked.
• ExtendCrvOnSrf: 여러 개의 커브를 선택할 수 있습니다.
• ExtendTrimmedSrf: No longer shrinks (ShrinkTrimmedSrf) the result.
• ExtractIsocurve: 새로운 Direction과 ExtractAll 옵션이 추가되었습니다.
• ExtractSubCrv: 새로운 Copy와 Join (결과 개체에 대한) 옵션이 추가되었습니다.

• FilletEdge:

  • 블록 인스턴스를 원래 개체로 무시하게 되었습니다.
  • 새로운 FromTwoPoints 옵션에서는 반지름 거리를 두 점을 지정하여 설정하게 됩니다.
• HBar: New FixedHandleLength=Yes/No option.
• Insert: 대화상자 레이아웃이 향상되었습니다.
• InsertControlPoint: When picking either a curve or surface, you can now insert multiple control points (or rows in the case of surfaces) in the same command session.

• InsertKink:

  • Now works on surfaces.
  • Existing kinks or potential kinks are now drawn as blips on curves and as isocurves on surfaces.
• InsertKnot: You can now snap to the knot-span midpoints with Point osnap.

• InterpCrv:

  • New PersistentClose option.
  • New Free option for start and end tangent direction allows more tangent control.
• Join: When the script mode fails, will now print a command line message rather than displaying a dialog box.

• Lasso

  • Selects all types of objects; not just points.
  • New selection modes: Window, Crossing, and Invert Window options allow selecting objects inside, crossing, or outside of a multi-sided polygon enclosure.

• Layer:

  • Right-click in the Layer window with nothing selected to display new Collapse All and Expand All options on the context menu. Right-click with one or more layers selected to display new Collapse Sublayers and Expand Sublayers that collapse and expand just the sublayers in that branch.
  • New Match Properties option creates a new layer with the same color, material, line style, etc. as an existing layer.
  • New Yes to All and No to All buttons have been added to the Delete Multiple Layers dialog box.

• Line:

  • Normal: you can now enter the length by typing a value.
  • Perpendicular FromFirstPoint now draws a line perpendicular to a curve point to any direction. Use Ortho to draw a line parallel to the construction plane.
  • Letter shortcuts were different at various stages of the command, so the BothSides option is moved to the beginning of the list. That way BothSides gets "b" for shortcut and Bisector is left with "i".
    
• MakeHole: 새로운 DeleteInput 옵션.
• MarkFoci: For elliptic, hyperbolic and parabolic curves added to menu Curve->Points->MarkFoci.
• Mirror: Option to mirror around construction plane axes has been added.
• Mouse: The middle-mouse button can now be customized to emulate view manipulation in other software.
• MPlane: 새로운 UseObjectPlane 옵션을 사용하여 평면을 커브 또는 서페이스로 설정할 수 있습니다.

• Object snaps:

  • Now work when dragging objects. If you start dragging, and a drag osnap is active, the snap point will be used as the drag base point, and osnaps will be enabled for the "to" point pick too.
  • New Vertex snap for polygon meshes. It works for osnapping to the mesh vertices.
  • The wireframe of the object you are osnapping to now thickens slightly.
• OffsetMesh: New BothSides option creates meshes on each side of the selected mesh object.
• Open:DWG/DXF: AutoCAD paperspace entities now import to Rhino layout objects and vice versa.

• Options:

  • Appearance: A new option to toggle command line autocompletion has been added.
  • Selection Menu: New options for what information is displayed in the Selection menu.
• OrientOnSrf: The Copy checkbox has been removed from the dialog box and added as a command line option.

• OSnap:

  • Cen: Works on annotation text bounding boxes.
  • Point: Works on the center and corners of rectangular lights and on text base points and block insertion points even if control points are off.
  • A subtle changes makes object snaps prefer a selected object over a non-selected objects when the snap points are identical.
• Pan: 마우스 오른쪽 단추를 사용하여 회전을 시작한 후 Shift 단추를 누르면 회전이 가로/세로 방향으로 잠깁니다.
• Print: PictureFrame objects now print in vector output.
• Project, Pull, DupEdge, DupFaceBorder, ExtractWireframe, ExtractControlPolygon, ExtractPt: New OutputLayer option.
• Properties, Material: Scripting options have been changed: Reflectivefinish > GlossFinish and Specular > GlossColor.
• Purge: Now deletes empty groups and unused linetypes from the model.

• Radius:

  • Now ignores the Cen object snap.
  • Now asks for a curve first, and then prompts for points until you press Enter.
• RemoveKnot: 새로운 Undo 옵션이 추가되었습니다.
• Repeat 명령이 Tools->Repeat Command Script 메뉴로 추가되었습니다.
• RhinoScript: JScript, Perl, Python, Ruby, TCL, Haskel, Lua 등 Microsoft의 Active 스크립팅 인터페이스를 지원하는 모든 스크립팅 언어를 지원합니다.
  

• Rotate and Rotate3D:

  • The Copy option is now a Yes/No toggle and is remembered within a Rhino session.
  • The Angle is now remembered within a Rhino session.
• RotateView: The cap on the increment value has been raised by a factor of 10.
• RoundHole: New SrfNormal, CPlaneNormal, and Pick direction options have been added.
• Save:3dm: Rhino V5 files are smaller than V4.

• Save:DWG/DXF: 

  • Simple solids now export to AutoCAD as 3DSolids.
  • It is now possible to import and export existing named schemes.
• Scale, Scale1D, Scale2D, ScaleNU: 복사 옵션에 예/아니요를 설정해두면 Rhino 세션간에 설정 내역 지속됩니다.
• SelBrush가 메뉴에 추가되었습니다. Edit->Objects->Area and Volume->Brush.
• SelCircular가 메뉴에 추가되었습니다. Edit->Select Objects->Area and Volume->Circular.
• Select - Changed behavior: For grouped objects control+click deselects the whole group, Shift+Control+click deselects the clicked item only.
  
• 선택 메뉴: 새로운 모두 옵션이 추가되었습니다.
• SelectionFilter: 메뉴에 추가되었습니다: Edit->Selection Filter
• SelLayer: New option in scripting version (-SelLayer) allows selection of an object to set the layer.
• SetPt: Typing a number when only one of the axis checkboxes is selected now accepts that number for the z-coordinate, leaving the other values unchanged.
• Shear: The Copy option is now a Yes/No toggle and is remembered within a Rhino session.
• ShowEdges: Now can "false color" highlight all edges, naked edges, or non-manifold edges.
• SmartTrack: 접선과 수직 추적선을 SmartTrack 옵션에서 각각 제어할 수 있게 되었습니다.
• SoftMove: 새로운 법선_이동 옵션을 사용하면 그립점 법선을 서페이스로 옮깁니다. 제어점의 인터페이스도 향상되었습니다.
• Sweep1: A new Simple option has been added.
• Taper: The Copy, Rigid, Flat, and Infinite options are now Yes/No toggles and are remembered within a Rhino session.
• Text: 9개의 맞춤 유형이 추가되었습니다.
• Twist: The Copy, Rigid, and Infinite options are now Yes/No toggles and are remembered within a Rhino session
• UnTrim: New RemoveAllTrims option removes all trims on the object. 
• VariableFillet/Chamfer/BlendSrf:
  
  • New FromCurve and FromTwoPoints options are available when editing handle radius.
  • The status bar shows the edge radius, also when editing the handle radius.
  • The handle shows the radius preview.

• VariableFilletEdge:

  • 새로운 커브로부터 옵션을 사용하면 반지름을 기존 커브와 일치시킵니다.
  • 새로운 두점으로부터 옵션은 두 점을 지정하여 반지름을 정의합니다.
    
• Viewport dragging won't "snap" 10 pixels at a time while you are dragging it horizontally or vertically. Snaps should only occur when you line up with other existing viweoprt edges.
• Weld: Edges that will be affected by Weld or Unweld will now be highlighted.
• What: The total number of meshes, vertices, and polygons is now reported. This matches the Rhino V2 behavior.

• WireCut:

  • 새로운 양쪽 옵션이 추가되었습니다.
  • 새로운 원래개체_삭제 옵션이 추가되었습니다.
• Zoo: The new version of Zoo 4.0 on the Labs page now runs as a service.   http://en.wiki.mcneel.com/default.aspx/McNeel/ZooLabs.html
• Zoom Factor added to View->Zoom-> and right click viewport title->Pan, Zoom and Rotate.
• Zoom One to One Calibration added to View->Zoom-> and right click viewport title->Pan, Zoom and Rotate.
• Zoom One to One added to View->Zoom-> and right click viewport title->Pan, Zoom and Rotate.
• ZoomExtents: Text objects that contain no "printable" characters are now considered bad objects and can be selected with SelBadObject. These text objects do not affect the bounding box calculation in display and zoom extents.
• ZoomNonManifold and ZoomNaked commands are now nestable, and the use in ShowEdges is tuned up. Now when you use the Zoom button in ShowEdges to zoom to naked or non-manifold edges, the command used for zooming should end automatically.

• AlignMeshVertices: Pressing Esc completed the command instead of exiting. This is fixed.
• Arc:
  • All angle entry methods should work now: 45d, 39deg, 22.875degs, 12.345e2degree, 180degrees, 47.653395°.
  • When drawing an Arc Extension with Center option, the sign of the arc was wrong. 커브에서 떨어진 방향을 향하는 호는 양의 값이고, 커브상에서 구부러진 호는 음의 값이어야 했습니다. 이것이 수정되었습니다.
• BooleanDifference: Many improvements to Boolean commands.
• BooleanUnion: Failures with the new intersector have been fixed.
• BoundingBox: When a surface is flat, an attempt is made to make the bounding box a planar rectangle rather than a box with the vertical sides compressed.

• Camera:

  • 카페라 제어점을 마우스로 끌다 취소하면 디스플레이 업데이트가 올바르게 실행되지 않았습니다. 이것이 수정되었습니다.
  • 평행 뷰에서 카메라 위치에 오류가 발생할 수 있었습니다. 파일을 열었을 때 합당한 카메라 위치를 설정하는 방법으로 문제를 해결하였습니다.
• Cap: In some cases Cap built a surface that when untrimmed, leaves a margin between the surface edges and the trim; in other cases, no margin was left. This is fixed. A small margin is now always created.
• Chamfer: Typed distances did not update properly. This is fixed.
• ClippingPlane: A problem with clipping planes and ATI graphics cards has been fixed.
• ClosestPt: 명령 실패 오류가 수정되었습니다.
• Command feedback: Feedback when a command fails has been enhanced for many commands.
• Command prompts: a "Press Enter" prompt and other minor tune-ups affect many commands.
• Conic: Tangent and Perpendicular options now use two-step process for picking the point on curve. You get asked for a curve first and then a point on curve.

• Contour:

  • 너무 적거나 많은 윤곽 커브가 잘못 만들어졌습니다. 이것이 수정되었습니다.
  • 서페이스 인터페이스 문제가 수정되었습니다.
• Control points: Deleting a kink control point at the start/end of a closed polycurve incorrectly smoothed all kinks. This is fixed.

• Convert:

  • TrueType 글꼴 커브의 변환이 향상되었습니다.
  • 커브에서 호로 변환하는 기능이 향상되었습니다.
• Curvature: Failure bugs on spherical shapes have been fixed.
• CurvatureGraph: Display speed has been improved.
• CurveThroughPoints: Results differed depending upon the units system. This is fixed.

• 디스플레이 엔진:

  • 많은 디스플레이 문제가 수정되었습니다.
    
  • 원점에서 멀리 떨어진 커브의 제어점이 올바르게 표시되지 않았습니다.
• Divide: A problem with the calculation speed has been fixed.

• EditScript:

  • Double-byte issues have been fixed.
  • Now uses a new editor (Monkey).
• Ellipse, AroundCurve: Now works the same as Circle AroundCurve: The curve gets asked first, and the center second.
  
• Explode: Exploding meshes with a bazillion unwelded triangles (like meshes read from STL files) hangs Rhino. This is fixed. An error message informs the user if the mesh cannot be exploded.

• Extend:

  • The prepicked boundary curves were incorrectly not selected but still highlighted when the command ended. This is now fixed, prepicked boundaries should remain properly selected at the end.
  • When the edge curves were extended using the smooth option, some curves resulted in a degree 3 curve, while the others extended into an arc.  This was caused by curve simplification using too loose a tolerance. This is fixed.
• FilletEdge: Several UI problems with locating and adding handles.
• FilletSrf/Chamfersrf: Error messages now display when the fillet fails.
• Floating Viewports now float when closing and reopening a file.
• Flow: Option state for Copy, Rigid, and Stretch is now remembered.
• Hatch: New Basepoint option sets the starting point for the hatch pattern.
  
• Insert: The last inserted block name and the Group, Individual Objects and Block settings are now remembered.

• Intersect:

  • Trim, Booleans 등 명령에서의 커브/서페이스, 서페이스/서페이스 교차 기능이 향상되었습니다.
  • 정확도와 속도도 향상되었습니다.
  • 뾰족한 특이점(원뿔의 끝점과 같은)이 있는 서페이스와 서페이스끼리의 교차 기능도 향상되었습니다.
  • 많은 커브/서페이스 교차 실패 오류가 수정되었습니다.
• Layer: When objects were selected through the Layer dialog box for deletion, the layer was deleted instead of the objects. This is fixed. 
• Mesh: Many failure bugs have been fixed.
• NetworkSrf: Input curves were incorrectly calculated in some cases. This is fixed.
• Offset: When the input was a line curve, the result was a NURBs curve. When the input was a polyline with sharp corners, the resulting curves was a polycurve. The output is now simplified so curves the shape of a line get converted to lines.
• OffsetCrvOnSrf: A problem that created multiple curves has been fixed.

• Open:DWG/DXF:

  • paperspace 개체를 Rhino 레이아웃으로 가져올 때의 문제가 수정되었습니다.
  • 지원되지 않는 유형의 엔터티를 AutoCAD 2009 에서 가져올 때의 문제가 수정되었습니다.
• Open:PLY: Imported failed to recognize tokens in the header and clopsed. This is fixed.

• Open:STEP:

  • Import speed and memory usage has been improved. Opening a STEP file should be faster because of the new intersector code.
  • A problem opening large files has been fixed.
• Open:STL: STL import now welds at 22.5 degrees by default.  The command STLImportOptions changes the behavior for the duration of the session.
• Open:VRML: A problem opening VRML files created with PhotoModeler has been fixed.
• Option toggle state: Many commands now remember the state of the option toggles within a Rhino session.

• OSnap:

  • Tan: Sometimes incorrectly allowed a tangent to be located. This is fixed.
  • Quad: Did not override Perp in the case when the two are both valid. This is fixed
• Pan: The tolerance for determining whether a view is a plan view in order to switch from right-mouse button Pan to right-mouse button tumble has been tightened.
• PictureFrame: A problem with OpenGL display caused the image to turn white. This is fixed.
• PluginManager: Rhino를 시작할 때 크래시가 발생하여 플러그인 관리자에서 로드되지 않은 경우, 다음번 Rhino를 실행 시 로드를 멈춘다는 메시지 상자가 표시됩니다.
• Project: A problem with projecting polylines onto mesh objects has been fixed.
• Purge: Incorrectly attempted to purge linetypes in use by layers or objects. This is fixed.
• Pyramid/Cylinder/Cone: 방향_제한 옵션이 향상되었습니다.
• Render: Out of memory crash has been improved.
• RenderOptions: 한 파일의 DPI 설정이 다른 파일로 잘못 설정되었습니다.
• Rotate: A problem with storing the rotation angle with the Copy option has been fixed.
• Rotate3D, Rectangle > 3Point: Ortho feedback incorrectly referenced world coordinates instead of construction plane coordinates. This is fixed.
• RotateView: When rotating the view with the right mouse button, switching to another application with Alt+Tab and back to Rhino caused the view to rotate without pressing the right mouse button. This is fixed.
• RoundHole: Input for the command changed the drill point angle instead of the radius. This is fixed.
• Save:SAT: SAT 파일을 .dwg로 내보내는 기능이 향상되었습니다.
• Section: Many special-case bugs caused by intersection failures have been fixed.
• SelBoundary가 메뉴에 추가되었습니다. Edit->Objects->Area and Volume->Boundary.

• 개체 선택:

  • 속도와 정확도가 향상되었습니다.
  • 음영 처리 뷰포트에서 커브를 선택하는 기능이 향상되었습니다.
• Select: Objects can now be selected with a script using world coordinates.
• Split/Trim: Many special-case failures have been fixed.
• TextObject: In some cases, surfaces were created with flipped normals compared with the other characters. This is fixed. Surface normals face construction plane z-axis.
• ToggleFloatingViewports: 플로팅 뷰포트의 상태가 세션 간에 저장됩니다.
  
• Untrim:  The All option was set to Yes if a surface's natural edge was selected. Untrim now untrims all boundary selecting natural edge, but keeps option unchanged for next selection.
• VariableFilletEdge: 핸들_추가 옵션의 인터페이스가 향상되었습니다.
• Viewports: Viewport dragging and edge resizing has been changed. For example, the viewports no longer snap to an invisible grid, they now snap only to the edges of other viewports.
• Wirecut: 방향 옵션이 올바르게 실행되지 않았습니다. 이것이 수정되었습니다.
• Worksessions: 고스트 뷰포트 모드에서 작업세션 개체를 선택할 때의 문제가 수정되었습니다.

 © 2010 

McNeel • 북미 • 유럽 • 남미 • 아시아