Rhino 5.0 Work-in-Progress Release 2010-02-02 - What's New |
|||
|
|||
New in Rhino 5.0:
- Rhino 5.0 is faster and more stable than Rhino 4.0.
- Runs native on 32- and 64-bit Windows platforms.
- Display is much faster than 4.0.
- Installs beside Rhino 4.0 - you can continue to use Rhino 4.0.
Warning:
- Rhino 4.0 SR5 or newer must be installed for Rhino 5.0 to work.
- Les versions WIP peuvent planter, se bloquer ou altérer des fichiers.
- Read about the Rhino Development Process before you download.
What's New, WIP 2010-02-02 (2-Feb-2010)
(Format imprimable)
Correction des bogues:
- DimOrdinate: Did not automatically detect whether to make an X or Y datum dimension as it did in V4. This is fixed.
- MaterialEditor: A crash in the Blend material has been fixed.
- ReduceMesh crash fixed.
- Reparamaterize: When surfaces are included in a block object, they are duplicated for reparameterization.
- Text: A new Mask option has been added that displays a rectangle that hides the geometry underneath in the display and for printing. The mask color and border can be configured with TextProperties.
What's New, WIP 2010-01-26 (26-Jan-2010)
(Format imprimable)
Fonctions améliorées:
- Open:STEP: Now supports nonstandard schema names and abbreviated entity types created by Unigraphics.
Correction des bogues:
- Autocomplete: The space between the exact and fuzzy matches incorrectly acted as Enter. This is fixed.
- OrientOnSrf crash fixed.
- RunScript crash fixed.
What's New, WIP 2010-01-19 (19-Jan-2010)
(Format imprimable)
Nouvelles technologies:
- Rhino Render:
- The Content Browser is now gone, and you can replicate its functionality exactly with the new stuff.
- There are default groupings set up for the tabs now.
- The menu is now reconfigured.
Fonctions améliorées:
- ExtractMeshEdges: A new Join results option has been added.
- Slab: New BothSides option added.
Correction des bogues:
- Dim crash fixed.
- ExtrudeCrv crash fixed.
- CongéBord : plusieurs bogues ont été corrigés.
- Import crash fixed.
- Ouvrir DWG/DXF : erreur corrigée.
- PatchSingleFace: The command incorrectly quit if a non-naked edge was selected. This is fixed.
- RemoveKnot: The display did not correctly update as knots were removed. This is fixed.
- Save:OBJ: Now supports long lines.
What's New, WIP 2010-01-12 (12-Jan-2010)
(Format imprimable)
Correction des bogues:
- Block: Blocks containing objects on layers that were turned off could incorrectly still be selected. This is fixed. Now, if you can't see the block (the layer the entities are on is off), when window selecting, SelAll, or SelBlockInstance does not select the block even though insert layer is still on, the instance is not selected.
- EditScript: Ctrl+Y now works as Redo.
- Merge2Faces crash fixed.
- Zoom, Target: The OnSrf object snap did not work with this command.
New in Rhino 5.0:
- Rhino 5.0 is faster and more stable than Rhino 4.0.
- Runs native on 32- and 64-bit Windows platforms.
- Display is much faster than 4.0.
- Installs beside Rhino 4.0 - you can continue to use Rhino 4.0.
- Rhino 4.0 SR5 or newer must be installed for Rhino 5.0 to work.
- Les versions WIP peuvent planter, se bloquer ou altérer des fichiers.
- Read about the Rhino Development Process before you download.
What's New, WIP 2010-02-02 (2-Feb-2010)
(Format imprimable)
Correction des bogues:
- DimOrdinate: Did not automatically detect whether to make an X or Y datum dimension as it did in V4. This is fixed.
- MaterialEditor: A crash in the Blend material has been fixed.
- ReduceMesh crash fixed.
- Reparamaterize: When surfaces are included in a block object, they are duplicated for reparameterization.
- Text: A new Mask option has been added that displays a rectangle that hides the geometry underneath in the display and for printing. The mask color and border can be configured with TextProperties.
What's New, WIP 2010-01-26 (26-Jan-2010)
(Format imprimable)
Fonctions améliorées:
- Open:STEP: Now supports nonstandard schema names and abbreviated entity types created by Unigraphics.
- Autocomplete: The space between the exact and fuzzy matches incorrectly acted as Enter. This is fixed.
- OrientOnSrf crash fixed.
- RunScript crash fixed.
What's New, WIP 2010-01-19 (19-Jan-2010)
(Format imprimable)
Nouvelles technologies:
- Rhino Render:
- The Content Browser is now gone, and you can replicate its functionality exactly with the new stuff.
- There are default groupings set up for the tabs now.
- The menu is now reconfigured.
- ExtractMeshEdges: A new Join results option has been added.
- Slab: New BothSides option added.
- Dim crash fixed.
- ExtrudeCrv crash fixed.
- CongéBord : plusieurs bogues ont été corrigés.
- Import crash fixed.
- Ouvrir DWG/DXF : erreur corrigée.
- PatchSingleFace: The command incorrectly quit if a non-naked edge was selected. This is fixed.
- RemoveKnot: The display did not correctly update as knots were removed. This is fixed.
- Save:OBJ: Now supports long lines.
What's New, WIP 2010-01-12 (12-Jan-2010)
(Format imprimable)
Correction des bogues:
- Block: Blocks containing objects on layers that were turned off could incorrectly still be selected. This is fixed. Now, if you can't see the block (the layer the entities are on is off), when window selecting, SelAll, or SelBlockInstance does not select the block even though insert layer is still on, the instance is not selected.
- EditScript: Ctrl+Y now works as Redo.
- Merge2Faces crash fixed.
- Zoom, Target: The OnSrf object snap did not work with this command.
© 2010
McNeel •
Amérique du nord •
Europe •
Amérique Latine • Asie